Sciences & technologie. B, Sciences de l’ingénieur
Volume 0, Numéro 38, Pages 9-13
2013-12-31

Realization And Calibrating Of A Dip Coater For Thin Films Deposition

Authors : Ghanem S . Telia A . Benalla H . Benmounah S .

Abstract

In this work a homemade dip coater was carried out and calibrated in the laboratory in order to prepare thin films using sol-gel process. This system allows a translation motion downwardly and upward with a controlled speed. The down and up positions are fixed using two proximity sensors. A sample holder is immersed in a solution for a predetermined time and then is removed. The dipping speed, withdrawing speed and immersion time are controlled easily by the user in a wide range of choices. This dip coater works in automatic mode and it can be used manually. The dipping and withdrawing speeds were identified to frequencies of the converter. The stability of the system was well demonstrated. The XRD characterization of zinc oxide thin films obtained by using this dip coater shows three strong peaks of ZnO respectively (101), (002) and (100). This low cost system has proved its robustness and reliability.

Keywords

Automatic; Frequency converter; Motion control; Dip coating; ZnO thin films

Copper Oxide Thin Films Deposition By Spray Pyrolysis

Lamri Zeggar M. .  Aida M. S. .  Attaf N . 
pages 86-88.


Characterization Of Cuinse2 Thin Films Elaborated By Electrochemical Deposition

Meglali O. .  Bouraiou A. .  Attaf N. . 
pages 19-24.


Realization And Study Of Zno Thin Films Intended For Optoelectronic Applications

Herissi L. .  Hadjeris L. .  Moualkia H. .  Abdelmalek N. .  Attaf N. .  Aida M. S. . 
pages 39-43.