Journal of Applied Engineering Science & Technology
Volume 2, Numéro 2, Pages 51-55
2016-12-22
Influence Of The Cyclic Loading Of Very Large Number Of Cycles On The Pile Capacity
Auteurs : Bekki Hadj . Tali Brahim . Canou Jean . Dupla Jean-claude . Bouafia Ali .
Résumé
The paper presents a study of the bearing capacity of a pile model in calibration chamber, under a cyclic axial loading, up to very large number of cycles. The experimental study is aimed to the evolution of the bearing capacity of pile obtained after a cyclic loading up to 105 cycles. Firstly, we present briefly the experimental device and then the results of cyclic tests performed on the pile model in the calibration chamber. Several parameters which have a significant influence on the cyclic behavior of piles have been investigated, such as the cyclic displacement amplitude and the density of the soil. The analysis of results indicated that the mechanism of densification of the soil around the pile leads to improve pile capacity.
Mots clés
Calibration chamber; Pile model; Soil; Interface; Bearing capacity; Cyclic loading
Les articles similaires
Yahia Zeghoudi
.
pages 74-88.
بوسالم أحلام
.
عابد يوسف
.
ص 117-132.
Bekki Hadj
.
Tali Brahim
.
Canou Jean
.
Dupla Jean-claude
.
Bouafia Ali
.
pages 11-16.
Bouzeboudja Aldjia
.
Melbouci Bachir
.
Bouzeboudja Ouardia
.
pages 127-136.
Boumaaza Messaouda
.
Bezazi Abderrezak
.
Bouchelaghem Hafida
.
Benzannache Naziha
.
Amziane Sofiane
.
Scarpa Fabrizio
.
pages 84-92.
