Journal of New Technology and Materials
Volume 5, Numéro 2, Pages 24-27
2015-12-25
The Barrier Height And The Series Resistance Of Ag/sno2/si/au Schottky Diode Determined By Cheung And Lien Methods
Authors : Benhaliliba Mostefa .
Abstract
Electronic parameters of Ag/SnO2 /Si/Au Schottky diode (SD) determined by Cheung and Lien methods are extracted using the current-voltage (I-V) and the capacitance-voltage (C-V) characteristics. Such SD is fabricated by the spray pyrolysis and the metallic contact is achieved by thermal evaporation process in vacuum. To determine more parameters of SD, the quantities like dV/dlnI, H(I) and Ga(V) are introduced. The non-ideal behavior of SD is confirmed, n=4.86 (n>1), the barrier height FB and the series resistance Rs are found to be 0.62 V and 585 Ω (by dV/dlnI), 524.5Ω (by H(I). The use of C-V and C-²-V plots allow us to determine the density of acceptor (Na) and diffusion potential (Vd), at a kept frequency of 1MHz, of 7.8 1021 cm-3 and 0.49 V respectively. The profile of C-V, measured at various frequencies, reveals a p type of as fabricated SD where tin oxide layer is doped with 4% indium.
Keywords
Tin oxide; Indium doping; Spray pyrolysis, Schootky diode; Ideality factor; I-V measurement; C-V characteristics.
Les articles similaires
بوسالم أحلام
.
عابد يوسف
.
ص 117-132.
Yahia Zeghoudi
.
pages 74-88.
Mahi A.
.
pages 103-108.
Benhaliliba M.
.
pages 605-617.
Hamri D.
.
Teffahi A.
.
Saidane Abdelkader
.
Chalabi D.
.
Djeghlouf A.
.
pages 42-51.
