Journal of Materials and Engineering Structures
Volume 6, Numéro 2, Pages 157-165
2019-06-30

Adhesion And Rheology Of Joints Fresh Mortars



Authors : Bouras Rachid . Si Hadj Mohand Chafiâa . Sonebi Mohammed .

Abstract

An adhesive mortar in fresh state is considered as a granular suspension in a complex fluid. The study of the rheological behavior of such materials involves the rheology of complex fluids, including granular suspensions, colloidal dispersions, etc... To characterize the rheological behavior of an adhesive mortar, in quasi-static regime, we use a three-parameter behavior law that includes a yield stress, a viscosity coefficient and a fluidity index. The adhesiveness of the mortar can be characterized by identifying the evolution of the adhesive force, the cohesive force and the adherence force. The mortar characteristics are measured by a commercial rheometer from Texas Instruments (TA). In this study, we use a plane-plane geometry for the Probe Tack Test to determine the adhesiveness of the materials. The rheological property of the mortar is investigated using the Vane-Cylinder geometry (figure 1.5). The mechanisms of separation and rupture in a tensile material confined between two parallel plates are studied theoretically and experimentally. This study is conducted for a materials selected for his rheological behavior (Herschel Buckley). We studied the rheological behavior and the influence of additions of organic additives on the rheological parameters intrinsic to the material, and the failure mechanisms. This study has allowed us to observe the different types of rupture.

Keywords

Joint mortar; Rheology; Adhesion

Les articles similaires

Rheology Serving The Environment To Characterize Sludge From Wastewater Treatment Plants (wwtps); New Model For New Concentration Range

Djafari Driss . 
pages 151-156.

Rheology And Scaling Behavior Of Swelling Clay Dispersions

Chaoui S. .  Mehamha A. .  Belkham N. H. .  Benachour D. . 
pages 202-209.

Analyse Expérimentale Et Numérique Du Comportement Des Joints Des Poutres En Treillis Métalliques De Section Rectangulaire Creuse

Slimani Fayçal .  Redjel Bachir .  Saidani Messaoud .  Kebaili Bachir . 
pages 190-212.

Modélisation à 3-d De L’influence De La Taille Des Grains Et De La Vitesse De Recombinaison Aux Joints De Grain Sur Une Photopile Au Silicium Poly Cristallin Sous éclairement Concentré

Zoungrana M. .  Zerbo I. .  Barro F.i. .  Sam R. .  Touré F. .  Samb M.l. .  Zougmoré F. . 
pages 649-664.

Joints And Obesity, Adverse Effects And Means Of Prevention

Boukara Zouhir .  Benzaoui Sabah .  Louazani Chahinez .  Amri Zohra .  Nouar Abdelkhalek Cherif . 
pages 68-76.

Formats de citation